5083 h116 aluminum sheet supplier 5083 h116 aluminum sheet

5083 h116 aluminum sheet supplier introduction 5083 h116 aluminum sheet
The main alloying element of 5083 h116 aluminum sheet is magnesium, also known as magnesium aluminum alloy.
5083 h116 has high corrosion resistance, good weldability, and medium strength. It has a wide range of applications in the manufacture of transportation vehicles, ship sheet metal parts, instruments, hardware products, and electrical enclosures.
5086 aluminum sheet has higher strength than 5052 or 5083, and its mechanical properties change significantly with hardening and temperature. Compared with other aluminum sheet products, the anti-corrosion performance of 5086 aluminum sheet is an important reason for its wide application. Therefore, 5086 aluminum sheet is also called “anti-rust aluminum sheet”.
5083 h116 aluminum sheet supplier

5083 h116 aluminum sheet supplier temper

O-soft
H111-Annealing and slight strain hardening (less than H11) in subsequent operations (such as stretching or leveling).
H112-Applicable to some tempered alloys obtained from the forming process. These alloys have no special control on the amount of strain hardening or heat treatment, but have mechanical properties restrictions.
H116-Applicable to aluminum-magnesium alloys with a magnesium content of 4% or higher, and specifies mechanical performance limits and spalling corrosion resistance.
H32-Work hardened by rolling and then stabilized to quarter hard by low temperature heat treatment
H321-suitable for alloys with strain hardening less than the amount required for controlled H32 tempering
H36-strain hardening and stability-3/4 hard.
5083 Aluminum Sheet and Plate

5083 h116 aluminum sheet supplier introduces its features

Heat-treated alloy 5083 is annealed at 350°C. The temperature and cooling time are not important. Stress relief is rarely necessary, but it can be done at about 220°C. If you are concerned about strength loss, you should perform a stress relief test.
Alloy 5083 is prone to spalling corrosion in severe applications. The 5083 h116 aluminum sheet is the least sensitive and has passed the peeling sensitivity test. It is recommended that alloy 5083 should not be used above 65 °C.
Welding 5083 h116 aluminum sheet will reduce the tensile strength and yield strength to the annealed state. The aluminum must be very dry and clean to avoid contamination and porosity of the weld. All traces of flux used in welding or brazing must be removed by scrubbing with hot water.
Aluminium Sheet 5083 at Best Price

5083 h116 aluminum sheet supplier marine grade aluminum

Generally, heat treatment of any alloy will increase its mechanical strength. 5083 h116 aluminum sheet exhibits high strength in other non-heat-treatable alloys. In order to increase the tensile strength of the material, the 5083 aluminum sheet needs to be cold-worked and subjected to H series specified tempering treatment. Despite its high strength, it is not advisable to use this alloy at temperatures exceeding 65 °C. Due to its resistance to the marine environment, 5083 aluminum sheet is suitable for shipbuilding applications. From henan mingtai aluminium