5052 h32 aluminum sheet Turkey

As a 5 series aluminum-magnesium alloy, as a representative product, 5052 is currently used in a large amount. This series has excellent bending performance under H32 tempering, and there will be no cracking problems in bending, so it can be used as a sheet metal material. At the same time, due to the 2.5% magnesium alloy content, the corrosion resistance, rust resistance and fatigue resistance of this product are higher than other series products. 5052 h32 aluminum sheet Turkey has many advantageous features.
5052 h32 aluminum sheet Turkey

H32 in 5052 h32 aluminum sheet Turkey

First of all, 5052 represents the alloy of the product. 5 is the first digit, which means that the product is an aluminum-magnesium alloy product. Then according to the chemical composition, it can be seen that the magnesium alloy content of the product is between 2.2-2.8%. Usually the enterprise takes the intermediate value during the processing process. That is, the magnesium alloy content is 2.5%, so this series of aluminum sheets can become AlMg2.5 again.
Secondly, H32 represents the processing temper of the product. H can be understood as incomplete annealing and work hardening temper, that is, the product has been annealed and the hardness is downgraded and suitable for processing and molding. At the same time, in order to avoid the product’s hardness from being too soft, proper work hardening is carried out. 32 represents that the product has undergone stabilization treatment, and the hardness is 1/4 hardness.
5052 h32 aluminum sheet near me

5052 h32 aluminum sheet Turkey flatness

The flatness of 5052 h32 aluminum sheet is an important indicator, especially for finished products. The flatness of 5052 h32 aluminum sheet is an important feature. First of all, for aluminum strips with a thickness of less than 2.0mm, the correction of the straightening rod alone is not very helpful to the flatness, and the pull-bending correction equipment is required to perform the stretch-bending correction, otherwise the flatness will not meet the requirements. At present, some companies often fail to go through this process, resulting in poor flatness. Secondly, medium-thick aluminum plates should use large-scale leveling equipment to perform multiple passes and azimuth corrections. If possible, you can introduce a milling machine, and at the same time pay attention to frequent correction of the pressing roller. At present, 5052 h32 aluminum sheet is widely used in sheet metal processing (such as chassis, cabinets and other products that need to be bent and formed)
5052 h32 aluminum sheet thickness

5052 h32 aluminum sheet Turkey and tempering

H32 is the most commonly used tempering. It can be bent at 90 degrees under this temper. It is suitable for the manufacturing needs of various sheet metal parts, chassis cabinets, lamp manufacturing and other industries.
O temper is a soft temper, which has the lowest strength and higher elongation, which is suitable for stretching.

China Mingtai Aluminum 5052 h32 aluminum sheet thickness

The 5052 h32 aluminum sheet produced and sold by our company has the following advantages:
High flatness;
The alloy content implements the national standard;
Good surface finish;
According to user needs, single-sided or double-sided protective film can be applied to the surface, which effectively avoids scratches on the product surface;
For some commonly used 5052 h32 aluminum sheet thickness, we will have stock in stock, such as the commonly used 4 x 8 aluminum sheet. As a high-quality hot-rolled aluminum sheet, 5052 aluminum sheet has good anodizing performance. After oxidation, there will be no water ripples on the surface and no color difference. The internal structure and microstructure of the high-quality 5052 aluminum sheet are uniform, which is suitable for anodizing processing.