5 bar aluminum tread plate supplier

The pressed aluminum plate has a convex diamond pattern on one side and a bare aluminum plate on the other side. This aluminum plate is the aluminum tread plate. They can be classified according to patterns, alloys can be classified, or they can be classified according to applications. If it is classified according to the pattern, then 5 bar aluminum tread plate is one of the types. 5 bar aluminum tread plate supplier is not uncommon, but there are not many manufacturers with high product quality and low price.
5 bar aluminum tread plate supplier

5 bar aluminum tread plate supplier introduces its special features

Exterior. Everyone knows the characteristics of aluminum, its appearance is bright, and there will be no rust even after contact with humid air. Instead, aluminum oxide is formed to form an oxide film to prevent the aluminum plate from continuing to oxidize or corrode, so the service life is much longer. Higher than iron. At the same time, post-maintenance is simple. It takes some time in use and later maintenance, which will make its service life longer.
density. The density is only 2.71, and other conditions are the same, the weight of the aluminum tread plate is 1/3 of the iron tread plate. The price is relatively low.
5 bar aluminum tread plate supplier near me

5 bar aluminum tread plate supplier introduces its use

The main purpose of aluminum tread plate is anti-skid. Because the aluminum tread plate has been pressed and rolled by an embossing machine, various patterns are formed on the surface. The raised pattern plays a good anti-slip effect, so it determines the purpose of the product. Aluminum tread plate is mainly used in various places where anti-skid is required.
Anti-slip is required in many places, such as ships, vehicles (between the carriages of subways, trains, and high-speed rails, internal floors of buses and pedals), various pedals, elevators, workshops and other places that require anti-skid. Application of 5 bar aluminum tread plate.
5 bar aluminum tread plate factory

Mingtai Aluminum 5 bar aluminum tread plate supplier

Most 5 bar aluminum tread plates are applied to various pedals, all of which need to be bent at 90 degrees. Therefore, the bending performance of 5 bar aluminum tread plate is one of the more important mechanical properties. Mingtai Aluminum has professional annealing equipment, and the bending performance of 5 bar aluminum tread plate reaches the level of bending without cracking. The pattern height is high and the anti-slip performance is good. If you are looking for aluminum tread plate for your next project, and it is required that the 90-degree bending of sheet metal processing will not cause cracking or seam problems, you can click on the right to contact us for online consultation. In addition to the above-mentioned bending performance, our aluminum tread plate also has good hardness and excellent elongation. At present, the customer’s consumption has been increasing. According to your needs, we produce a variety of specifications of 5 bar aluminum tread plate with a maximum width of 2600 mm. Not all aluminum plate manufacturers have this production capacity.